peaklogo.gif
 
Local: 508-977-0700
Non-Local: 866-977-0700

Peak Vises and Accessories

peak_tube_fly_vise_sm.jpg PEAK Rotary Tube Fly Vise
$169.95
For the tyer who wants to tie on tubes.
  • Rotary Vise assembly with Chuck
  • Silky smooth, solid brass bearing rotation allows for infinite adjustments from free spinning to fixed stop.
  • No collets that require changeout, maximizing convenience and minimizing set-up time
  • The chuck will accept pins and metal tubes up to 1/8 in diameter
  • Custom ground pins have a shallow sloped shoulder for capturing the tubing
  • Fully adjustable, quick positioning "PEAK Mountain" bobbin rest for total thread control & advanced techniques.
  • Choice of pedestal or clamp base
  • Comes with two pins, 1/32 and 1/16 (other sizes available separately)


  • peak_basecamp_package.jpg PEAK Base Camp Vise Package
    $249.95
    For the tyer wanting to maximize the performance of their PEAK Rotary Vise.
  • Rotary Vise assembly with Standard Jaws
  • Silky smooth, solid brass bearing rotation allows for infinite adjustments from free spinning to fixed stop.
  • Lever operated cam jaw closure action holds hooks rock solid.
  • Upgraded, all brass, knurled adjusting knobs
  • Adjustable Brass riser allows a full 1.75" height adjustment for better tying comfort.
  • Fully adjustable, quick positioning "PEAK Mountain" bobbin rest for total thread control & advanced techniques.
  • Choice of pedestal or clamp base
  • Extra jaw in choice of saltwater or midge
    (Summary - Standard Jaws, Brass Riser, Brass Screws, Long accessory Shaft, Bobbin Rest, D-Arm Rotary Handle, 2 Material Clips, DVD, base option, extra jaw option)


  • peak_trailhead_vise_package.jpg PEAK Trailhead Vise Package
    $219.95
    For the tyer who wants to start tying out of the box, the Peak Trailhead vise package.
  • Rotary Vise assembly with Standard Jaws
  • Silky smooth, solid brass bearing rotation allows for infinite adjustments from free spinning to fixed stop.
  • Lever operated cam jaw closure action holds hooks rock solid.
  • Fully adjustable, quick positioning "PEAK Mountain" bobbin rest for total thread control & advanced techniques.
  • Choice of pedestal or clamp base
  • Tool caddy holding the Ritt Pick-n-Brush, Hex Stacker, Scissor, Bobbin, Whip Finisher, Hackle Plier, Bobbin Threader
    (Summary - Standard Jaws, base option, Tool set, DVD)


  • peak_prvg2.jpg PEAK Rotary Vise PRV-G2 Package
    $149.95
  • All components are high quality stainless steel, hardened tool steel, delrin, brass, and aluminum (the jaw tube link arm).
  • The powder coated steel base provides a stable work platform as well as a convenient rounded edge pocket for beads, hooks, etc. and includes a second hole for mounting an optional Accessory Shaft as shown.
  • A brass tipped set screw and provided Allen wrench allow the vise to break down flat for travel.
  • The hardened jaws can hold hooks from 02 streamers down to #24 midges.
  • The positive stop cam action allows repeatable gripping from the first fly to the last.
  • Additional features include a height and length adjustable bobbin rest, a quick change jaw, and infinitely adjustable friction knob.
  • An optional saltwater or midge jaw can replace the standard jaw in under two minutes.
  • LIFE TIME warranty against materials and workmanship.
    Package includes the base, bobbin rest and standard jaws.

  • peak_prvc_sm.jpg PEAK Rotary Vise PRV-C1 Package
    $149.95
  • Same as the package above except the pedestal base is replaced by our Clamp Mount.
  • The Clamp allows the vise to be attached to a table thickness of 11/16" up to 2-1/4".
  • Weighing in at only 8 oz. this makes for a great choice for traveling.
  • The brass tipped set screw allows repeated assembly and re-assembly without scaring the riser shaft.
  • The PRVC-1 carries a LIFE TIME warranty against materials and workmanship.
    Package includes the Clamp, bobbin rest, standard black nylon screws, and standard jaws.

  • peak_sw_jaw_sm.jpg PEAK Rotary Vise Saltwater Jaw
    $37.95
  • This jaw has been designed to hold saltwater and large freshwater hooks.
  • Saltwater jaws undergo the same hardening and tempering process as Peaks standard jaws.
  • Black oxide finish reduces glare in the immediate area of your hook
  • Saltwater jaws are for hook sizes up to 6/0 ( hook wire diameters from approximately .040" to .075").

  • peak_midgejaw.jpg PEAK Rotary Vise Midge Jaws
    $37.95
  • This jaw has been designed to hold tiny midge hooks while allowing free access to the hook - sizes 16 and smaller.
  • Midge jaws undergo the same hardening and tempering process as Peaks standard jaws.
  • Black oxide finish reduces glare in the immediate area of your hook
  • The picture at the left is a midge on a #22 hook as a reference.

  • peak_accessory_shaft.jpg PEAK Accessory Shaft
    $9.95
  • A unique and a very useful accessory.
  • It provides a place to mount items such as a light or profile plate in your work area, but not on your vise.
  • Compatible with both PEAK's Pedestal Base and C-Clamp.
  • Accepts any accessory designed to mount to a 3/8" diameter shaft.

  • peak_brassscrews.jpg PEAK Brass Screw Upgrade Kit
    $14.95
  • The standard black nylon screws of the PEAK Rotary Vise can be replaced using the brass screw upgrade kit.
  • The 1/4-20 thumb screw used to set the tension on the rotary motion has a nylon tip so that the stainless steel rotary shaft is not scarred.
  • The 8-32 thumb screw is for the bobbin assembly.

  • peak_darm.jpg PEAK D-Arm
    $9.95
  • The D-Arm is a handy rotary handle that can be added to any standard rotary fly tying vise with a 1/4" diameter handle.
  • A 5/32" allen wrench is included to allow you to position the D-Arm at the desired height and secure it to the existing handle.
  • The photo shows the D-Arm attached to the PEAK Rotary Vise handle.
  • A happy customer, Sid D., brought this great idea to our attention so his name will be forever attached to this handy device.

  • peak_riser.gif PEAK Riser
    $27.95
  • The Riser is for those tyers that would like to adjust the height of their vise using either a pedestal base or the PEAK clamp.
  • The all brass body allows the adjustment you need when the table or chair height does not match your needs.
  • A brass tipped set screw, using the same 1/8" allen wrench used on the PEAK pedestal base and Clamp, is used to securely clamp any standard 3/8" riser while the lower portion can be clamped in your standard 3/8" hole in a pedestal base.
  • This is a great accessory when you do not get to choose the table height at your hotel or on river tying site.

  • peak_clamp.jpg PEAK C-Clamp
    $39.95
  • The clamp will allow you to attach your PEAK Rotary Vise or any other vise with a standard 3/8" diameter riser to your tying bench.
  • This clamp works on table tops from 11/16" up to 2-1/4" thick.
  • The lower jaw can be removed, flipped over and reassembled if you table top is very thin.
  • Our nice wide 1-1/2" format will give your vise a sturdy mount on the road or at home.
  • A second hole has been added to allow you to use an Accessory Shaft
  • At only 12 ounces, the PEAK Clamp will make your vise a welcome traveling companion and a great complement to your pedestal.

  • peak_pedestal.jpg PEAK Pedestal Base
    $39.95
  • The optional stand alone pedestal base is a white powder coated steel plate 6" x 6" x 1/2".
  • This rock steady pedestal base will NOT tip or move no matter how big the fly.
  • Rubber feet keep this massive base right where you put it.
  • A pocket with rounded corners allows easy retrieval of hooks, beads, supplies without getting them stuck.
  • A second hole has been added to allow the tyer to add an Accessory Shaft to get those items like a lamp or back ground plate off the main vise riser shaft.
  • A brass tipped set screw and Allen wrench will allow any standard 3/8" vice riser to become pedestal mounted.

  • peak_bobbinrest.jpg PEAK Bobbin Rest Assembly
    $19.95
  • The bobbin rest assembly can be added to any 3/8" diameter, standard, vise riser.
  • It consists of a cross bar mount, stainless steel rest, mountain shaped thread rest, and adjustment bolt.
  • Distance of the bobbin to the fly can be set with the black thumb screw.

  • peak_material_clip.jpg PEAK Material Clip
    $9.95
  • Comes with 2 sizes of spring to grip a wider range of materials better.
  • Straight spring design works better than a conventional wrapped spring, which results in the spring coils forming an inverted "V". PEAK's straight spring leaves parallel coils which will hold your materials more securely.
  • Will fit any 1/4" Diameter shaft.
  • Clips will rotate to any angle needed or completely out of the way and multiple Material Clips can be used in tandem.

  • peak_travel_pouch.jpg PEAK Vise Travel Pouch
    $24.95
  • Sewn in the USA, right here in Colorado, like all PEAK Fishing products
  • Heavy duty outer shell of tough nylon separates and protect your vise and accessories.
  • Will hold any of PEAK's vises with the Pedestal Base or the C-Clamp.

  • peak_dubbingbrush.jpg PEAK Ritt Pick-N-Brush Dubbing Tool
    $9.95
  • The tool has a stainless steel needle or bodkin tip on one end, covered with a rigid black plastic safety cap when not in use, and a nylon brush tip on the other end.
  • The wide, flat body keeps the Pick-N-Brush from rolling off your table.
  • Dubbing can easily be brushed out with the nylon bristles without cutting threads.
  • The dubbing tool has a brush diameter of 11/64" diameter.

  • peak_profileplate.jpg PEAK Profile Plate
    $24.95
  • Provides a perfect back ground for your fly while tying.
  • The neutral color will provide a crisp view of your fly with no back ground clutter.
  • The mount for the Profile Plate fits all 3/8" diameter vise risers or the PEAK Accessory Shaft.

  • peak_wastecatcher.jpg PEAK Waste Catcher
    $27.95
  • Has Peak's unique round shape and white rip stop nylon material for the same great contrast our white base gives you.
  • The mount snaps onto any standard 3/8" diameter vise riser shaft or the PEAK Accessory shaft.
  • Can be easily pulled off of the mounting bracket and emptied without having to remove other accessories.

  • peak_tying_light.jpg PEAK Tying Light
    $139.95
    PEAK's LED powered tying light is the best portable lighting solution we've found. The LED light source runs cool and provides up to 300 lumens with minimal power consumption. Even after a full day of tying the housing remains cool to the touch. No more need to worry about burning your hand if you accidentally touch your light. You also won't feel the heat build up in the area you're tying that you may from some light sources, making tying much more comfortable.
    The lamp provides a full spectrum white light that won't skew the color properties of the material you're working with.
    The bracket mounts to any PEAK vise stem, PEAK's Accessory Shaft or any 3/8" diameter vise stem. A 20" flexible neck allows optimal positioning of the light source.
    The lightweight construction for allows the light to be easily transported. The mounting bracket incorporates an integral tool holder. The light source emits 120 degrees of lighting to better illuminate your entire tying area.

    peak_magnum_hex_stacker.jpg PEAK Magnum Hex Stacker
    $44.95
  • Same concept as our standard Hex Stacker, but built magnum size to handle large bundles of hair for spinning and longer hairs such as buck tail.
  • The opening at the top is 1.13 inches in diameter and the cavity for the hair is 3-9/16 inches deep.
  • The base also works well for holding multiple colors of hair while stirring to blend scale.


    Quantity