Q. Can I use Permagloss to coat the entire rod?
A. Yes. Permagloss is intended to coat the entire rod, not just the thread guides. Proper preparation of the blank surface is essential prior to coating, a process far to lengthy to go into at this point.
Q. How many coats does it to take to seal a thread wrap?
A. Actually, one coat will seal the threads. You probably will want sufficient coats to create a smooth surface wherein no threads can be detected when scratching with a finger nail. It takes about 5 coats on the norm to pass the finger nail test. This is assuming A thread and no CP.
Q. My Permagloss always sets up in the bottle, what can I do to make it last longer?
A. Permagloss cures by exposure to moisture in the air. Keeping its exposure to air at a minimum is the only remedy. We are currently looking at other packaging, in an effort to ease this problem. Packaging in cans looks promising for the future.
Q. Will Permagloss prevent colors in the threads from fading?
A. No. Quite the contrary. Permagloss is so clear it has no UV barrier qualities. It will never be effected by UV itself, but the threads or any other surface under it must be UV resistant or they will be effected. |
