renzettilogo.gif
 
508-977-0700
e-Mail Us

Renzetti Accessories

renzetti_x8005_saltwater_pedestal_base.jpg Renzetti Saltwater Pedestal Base
$149.99
X8005 Be the first one to write a review
Zinc base powder coated with a saltwater stem support & 6" Stainless steel stem, 2 pockets, and protective pad.
Required for Extended Body Attachment
For Presentation 3000 & 4000 series. Standard on Masters

renzetti_x8063_deluxe_saltwater_pedestal_base.jpg Renzetti Deluxe Saltwater Pedestal Base
$205.99
X8063 Be the first one to write a review
Aluminum base hard anodized with 3 large pockets, engraved Renzetti logo, and protective pad.
with stem/support for Master, Presentation 3000 or 4000

renzetti_x8112_pedestal_trav_tube.jpg Renzetti Pedestal Base
$59.99
X8112 Be the first one to write a review
Made of cast zinc, then powder coated black
~4"W x 5"L x 1/2" thick; weighs 3 lbs
Comes with a 7" Anodize Aluminum stem - clear or black
Has non slip rubber protective pad to keep your vise in place as well as to protect your working surface.
for Tube Fly, Traveler, and Clouser Series

renzetti_x8087_pedestal_apprentise.jpg Renzetti Pedestal Base
$69.99
X8087 Be the first one to write a review
Made out of cast zinc then powder coated black.
~ 4"W x 5"L x 1/2" at 3 pounds.
includes 7" sandblast aluminum stem and a non slip rubber protective pad to keep your vise in place as well as to protect your working surface.
Stem for Apprentise

renzetti_x8101_standard_pedestal_p34.jpg Renzetti Standard Pedestal Base
$124.99
X8101 Be the first one to write a review
REDESIGNED from X8004
Made of cast zinc, then powder coated black
Includes 6" Stainless steel stem
6 x 6 x 1/2" base with with 2 pockets
Standard anodized aluminum stem support, a large stem lock knob and a protective pad under.
Designed for Presentation 3000 or 4000

renzetti_x8113_standard_pedestal_base.jpg Renzetti Standard Pedestal Base
$124.99
X8113 Be the first one to write a review
REDESIGNED from X8065
Made of cast zinc, then powder coated black
Includes 7" Stainless steel stem
6 x 6 x 1/2" base with with 2 pockets
Standard anodized aluminum stem support, a large stem lock knob and a protective pad under.
Designed for Presentation 2000

regal-streamer-bassmall Renzetti Streamer Pedestal Base
$159.95
x813x Be the first one to write a review
The Streamer Pedestal Base is designed for the Fly Tyer that requires a heavier Pedestal Base to tie their offerings. At a size of 6" wide x 8" long and 3/8" thick it weight almost 5 pounds.

Quantity
renzetti_x8000_cclamp.jpg Renzetti C-Clamp
$52.99
X8000X8111 Be the first one to write a review
Opening from 3/4" to 2.5"
Comes with a 8" Anodize Aluminum stem - clear or black
for Tube Fly, Traveler, and Clouser Series

renzetti_x8064_standard_c_clamp.jpg Renzetti Standard C-Clamp
$139.99
X8064 Be the first one to write a review
Opening from 3/4" to 2.5"
Comes with a 8" Stainless Steel stem
for P2000

renzetti_x8002_sw_cclamp.jpg Renzetti Saltwater C-Clamp
$139.99
X8002 Be the first one to write a review
Opening from 3/4" to 2.5"
Comes with 8" stainless steel stem
A must if you're using the extended body attachment
for P3000, C4000, and M6000

renzetti_x8073_special_edition_saltwater_c_clamp_assembly.jpg Renzetti Special Edition Saltwater C-Clamp
$149.99
X8073 Be the first one to write a review
The Special Edition Saltwater C-Clamp is made out of black anodized aluminum and it is offered as an accessory for the Special Edition Master Vise Series. It comes with an 8" stainless steel stem.

renzetti_x8007_parachute_attachment.jpg Renzetti Parachute Attachment
$54.99
X8007 Be the first one to write a review
Designed to tie parachute flies. Totally adjustable & ample room for roping of thread.
For All vises.

renzetti_x8049_visual_enhamcement_plate.jpg Renzetti Visual Enhancement Plate
$69.99
X8049 Be the first one to write a review
To maximize your visual acuity when tying, this detachable plate is designed to eliminate background clutter and glare. Depending on your tying needs the plate can be reversed to opt for a pale green or light gray backdrop.
For any Vise

renzetti_x8029_aluminum_stem_7.jpg Renzetti 7" Aluminum Stem
$21.99
X8029 Be the first one to write a review
This stem is used to replace your existing stem on your C-Clamp or Pedestal Base.
for Tube Fly, Traveler, and Clouser Series
Same as X8108, but anodized Clear

renzetti_x8108_aluminum_black_stem_7.jpg Renzetti 7" Black Aluminum Stem
$21.99
X8108 Be the first one to write a review
This stem is used to replace your existing stem on your C-Clamp or Pedestal Base.
for Tube Fly, Traveler, and Clouser Series
Same as X8029, but anodized Black

renzetti_x8054_6_stainless_stem.jpg Renzetti 7" Stainless Steel Stem
$23.99
X8054 Be the first one to write a review
For Traveler, Saltwater Traveler, Clouser and Tube Fly Vises.
This versatile stem allows the use of Traveler and Tube Series Vises on the Lap Extension, the Standard, Saltwater and Deluxe Saltwater Pedestal Base.
Required for Lap Extension

renzetti_x8029_aluminum_stem_7.jpg Renzetti 9" Aluminum Stem
$23.99
X8030 Be the first one to write a review
This stem is used to replace your existing stem on your C-Clamp or Pedestal Base.
for Tube Fly, Traveler, and Clouser Series
Same as X8109, but anodized Clear

renzetti_x8108_aluminum_black_stem_7.jpg Renzetti 9" Black Aluminum Stem
$23.99
X8109 Be the first one to write a review
This stem is used to replace your existing stem on your C-Clamp or Pedestal Base.
for Tube Fly, Traveler, and Clouser Series
Same as X8030, but anodized Black

renzetti_x8019_bobbin_cradle.jpg Renzetti Bobbin Cradle - Aluminum
$49.99
X8019 Be the first one to write a review
Used to support the Bobbin thread between tying operations. The Renzetti Bobbin Cradle is adjustable and easily removed while not using it. It is also a must while rotary tying.
Made of Anodized Aluminum. Comes standard on all Traveler Series & Pres 2000
Now available with black anodizing for Traveler 2300

renzetti_x8020_bobbin_cradle.jpg Renzetti Bobbin Cradle - Brass
$59.99
X8020 Be the first one to write a review
Used to support the Bobbin thread between tying operations. The Renzetti Bobbin Cradle is adjustable and easily removed while not using it. It is also a must while rotary tying.
Made of Brass & Stainless Steel. Standard on all Pres 3000/4000 and Master Series

renzetti_x9007_x9008_orings Renzetti Jaw O-Ring
$9.99
X900x Be the first one to write a review
5 per pkg


renzetti_x8016_3in_stem_extension Renzetti 3" Stem Extension
$15.99
X8016 Be the first one to write a review
Stem Extensions are used to extend the length of your existing stem.
Threaded top for P3000, P4000, Master

renzetti_x_8017_6in_extension Renzetti 6" Stem Extension
$23.99
X8017 Be the first one to write a review
Stem Extensions are used to extend the length of your existing stem.
Threaded top for P3000, P4000, Master

renzetti_x8047_bobbin_cradle_extension Renzetti Bobbin Cradle Extension
$15.99
X8047 Be the first one to write a review
Add up to 4" to your bobbin cradle

renzetti_x8015_cclamp_lap_extension.jpg Renzetti C-Clamp Lap Extension
$115.99
X8015 Be the first one to write a review
Allows position of the vise over your lap and is totally adjustable.

renzetti_x8044_cam_jaw_2200.jpg Renzetti Midge Cam Traveler Jaw Assembly
$89.99
X8102 Be the first one to write a review
Midge cam jaw to work on any Traveler
Hook sizes 28 - 2
Ideal for tying small flies on Travelers Series Series. Hook range is specified for you to use the True Rotary feature this vise offers as well as the true hook range of this jaw.

renzetti_x8006_material_clip Renzetti Material Clip
$10.99
x8006 Be the first one to write a review
A Material Clip is a must to any rotary vise. It allow you to keep the tying material away from the front of the hook while working on the fly.
Fits all Presentation Series Vises, all Travelers and Saltwater Traveler 2200 Series Vises.

renzetti_x8011_ausable_speed_crank.jpg Renzetti Au Sable Speed Crank
$174.99
X8011 Be the first one to write a review
If you are winding a lot of thread/material around the hook shank, this attachment with a 2:1 gear ratio can cut your tying time in half.
for Master, P3000, & C4000

renzetti_x901x_bent_shaft_traveler.jpg Renzetti Bent Shaft
$59.99
X901x Be the first one to write a review
The Versatility of the Traveler series vises is that you can convert a Traveler Vise into a SW Traveler by buying the SW Rotary shaft. All you need is a set of Saltwater Jaws.
The same can be done if you have a Saltwater traveler and would like to convert it to a Traveler Vise.

renzetti_x8070_clouser_minnow_arm_c2200.jpg Renzetti Clouser Minnow Arm
$49.99
X8070 Be the first one to write a review
The Clouser Minnow Arm is designed for the tying of long streamers with the proper material distribution, while still using the Cam jaws. Cam jaws are required.
for Traveler Vises

renzetti_x8071_clouser_minnow_arm_sc2200.jpg Renzetti Clouser Minnow Arm
$49.99
X8071 Be the first one to write a review
The Clouser Minnow Arm is designed for the tying of long streamers with the proper material distribution, while still using the Cam jaws. Cam jaws are required. for Saltwater Traveler Vises

renzetti_x8072_clouser_minnow_arm.jpg Renzetti Clouser Minnow Arm
$49.99
x8072 Be the first one to write a review
The Clouser Minnow Arm is designed to tie longer streamers and still use the cam style jaws
All anodized aluminum, made in the USA.
For Presentation 3000/4000

renzetti_x8082_clouser_minnow_arm.jpg Renzetti Clouser Minnow Arm
$59.99
x8082 Be the first one to write a review
The Clouser Minnow Arm is designed to tie longer streamers and still use the cam style jaws
All anodized aluminum, made in the USA.
For Presentation 2000

renzetti_x803x_mandrels.jpg Renzetti Mandrel Set
$22.99
X803x Be the first one to write a review
There are 4 mandrels available for the Tube Fly Vise. Each mandrel comes with a collect.
1/16" diameter comes standard with all of the vises
1/32" diameter and 1/8" diameter are included separately, or together in the vise set.
These 3 mandrels will hold tube up to 4" long.
There is also an 1/8" Saltwater that will hold 9" long tubes.

renzetti_x8028_clouser_minnow_arm.jpg Renzetti Master Clouser Minnow Arm
$59.99
X8028 Be the first one to write a review
This unique design facilitate the proper material placement along the hook shank, which is critical for achieving the silhouettes and profiles these patterns require.
The Clouser Minnow Arm for Masters is designed for the tying of long streamers with the proper material distribution. It is made out of anodized aluminum.
Made in the USA

renzetti_x8052_master_jaw.jpg Renzetti Master Jaw Assembly
$179.99
X8052 Be the first one to write a review
Replacement Master Jaw for Master vises with serial # 0001 to 864 and up. Hook 28 to 10/0. Also used on a Master Clouser Minnow Arm. Sec. Rotary shaft included.

renzetti_x8025_master_jaw_assembly.jpg Renzetti Master Jaw Assembly
$154.99
X8025 Be the first one to write a review
Replacement Master Jaw for Master vises with serial # 865 and up. Hook 28 to 10/0. also used on a Master Clouser Minnow Arm. Sec. Rotary shaft not included
Made in the USA

renzetti_x8076_master_material_clip Renzetti Master Material Clip
$22.99
x8076 Be the first one to write a review
The ideal accessory for your vise.

renzetti_x90_spare_parts_kit_master Renzetti Master Spare Parts Kit
$11.99
x9009 Be the first one to write a review
For Master Jaws
Just in case you lose one of those small but necessary pieces...
includes Jaw Adjusting Screw, Jaw Spring


renzetti_x8057_master_midge_jaw.jpg Renzetti Midge Master Jaw
$169.99
X8057 Be the first one to write a review
Designed to hold small hooks with enough room to work around the tip of the jaws.

The Master Midge jaws will hold hooks 28 to 2.

Limited warranty.

Hook range is specified for you to use the True Rotary feature this vise offers as well as the true hook range of this jaw.

Sec. Rotary shaft or Mtl clip not included.

for Masters with serial # 865 and up
Made in the USA

renzetti_x8066_cam_jaw_p2000.jpg Renzetti Presentation Cam Jaw Assembly
$107.99
X8066 Be the first one to write a review
Standard Cam Jaw Assembly for Presentation 2000 series
for hooks #28 - 4/0
Will also fit on Traveler

renzetti_x8045_cam_jaw_c4000.jpg Renzetti Presentation Cam Jaw Assembly
$107.99
X8045 Be the first one to write a review
Cam Jaw Assembly for Presentation 4000 series vises. The jaws have a military spec, anticorrosion coating. Brass handle.
for hooks #28 - 4/0
Rotary shaft not included

renzetti_x8023_jaw_p3000.jpg Renzetti Presentation Jaw
$49.99
X8032 Be the first one to write a review
For Presentation 3000 ONLY
Hooks #28-2

renzetti_x8046_cam_jaw_2200.jpg Renzetti Saltwater Cam Jaw Assembly
$97.99
X8046 Be the first one to write a review
Replacement jaw to work on any Saltwater Traveler
Hook sizes 4-8/0

renzetti_x900_spare_parts_kit_cam_traveler Renzetti Spare Parts Kit
$9.99
x900x Be the first one to write a review
This kit is ideal for the tyer that has a Renzetti vises for yeas. There is a kit for each series vise. For Cam Series vises the kit comes with jaw o-rings, springs, jaw adj. Screws and ball bearings.

renzetti_x9004_spare_parts_kit_presentation_P2000_P4000 Renzetti Spare Parts Kit
$9.99
x9004 Be the first one to write a review
For Presentation 2000 & 4000
Just in case you lose one of those small but necessary pieces...
Includes O-rings, Screws, Springs, Jaws Ball Bearing

renzetti_x8080_special_edition_au_sable.jpg Renzetti Special Edition Au Sable Speed Crank
$204.99
X8080 Be the first one to write a review
If you are winding a lot of thread/material around the hook shank, this attachment with a 2:1 gear ratio can cut your tying time in half.

renzetti_x8081_special_edition_lap_extension.jpg Renzetti Special Edition C-Clamp Lap Extension
$139.99
X8081 Be the first one to write a review
Allows position of the vise over your lap and is totally adjustable.

renzetti_x8079_special_edition_clouser_minnow_arm.jpg Renzetti Special Edition Clouser Minnow Arm
$69.99
X8079 Be the first one to write a review
The Clouser Minnow Arm is designed for the tying of long streamers with the proper material distribution. Additional sets of jaws are available.

renzetti_x8078_special_edition_spinning_attachment.jpg Renzetti Special Edition Spinning Attachment
$36.99
X8078 Be the first one to write a review
Allows spinning of the vise with finger tips or the palm of the hand.

renzetti_x8083_spinning_attachment.jpg Renzetti Spinning Attachment
$16.99
x8083 Be the first one to write a review
Allows spinning of the vise with finger tips or the palm of the hand.
For P2000

renzetti_x8010_spinning_attachment.jpg Renzetti Spinning Attachment
$26.99
X8010 Be the first one to write a review
Allows spinning of the vise with finger tips or the palm of the hand.
for Master, P3000 & C4000

renzetti_x8037_spinning_attachment_2200.jpg Renzetti Spinning Attachment
$16.99
X8037 Be the first one to write a review
Standard on the SW Traveler series, the spinning attachment can be added to any of the Traveler series for an easier rotation of the vise with the palm of the hand.

renzetti_x8044_cam_jaw_2200.jpg Renzetti Traveler Cam Jaw Assembly
$87.99
X8044 Be the first one to write a review
Replacement jaw to work on any Traveler
Hook sizes 28 - 4/0

renzett-r-evolution-travel-vise-case-sm Renzetti R-Evolution Storage & Transport Vise Case
$109.99 Be the first one to write a review
Bag this! Or at least your valuable fly tying goods when you're on the move. Renzetti is proud to offer a virtually indestructible padded travel bag made from 1680 grade ballistic material to store your vise, tools and other essential fly tying items.




Quantity

Game-Changer-Jaw-sm Renzetti Game Changer Jaw Assembly
$99.99 $89.99 On Sale!
X814x Be the first one to write a review
The Game changer Jaw makes the whole tying experience easier and faster.

Quantity